Handy Flo 800 Solder Pastes
|
Active Temp Range For Flux
|
Working Characteristics
|
Technical Documents
|
Handy Flo 801 Intermediate
Ideally suited for joining copper alloys, mild steels and most plated surfaces. Residue should be removed with hot water after soldering.
|
150°C - 275°C
300°F - 525°F
|
An intermediate chloride flux which is fluid and spreads well during heating. Good general purpose soldering system. Excellent stability.
|
133K
|
Handy Flo 826 Intermediate
Works well on copper and copper alloys, mild steel and some stainless. Flame and resistance heat work best. Residue should be removed with hot water after soldering.
|
150°C - 315°C
300°F - 600°F
|
Zinc chloride free system that will not spread until
molten. Very fluid flux.
|
132K
|
Handy Flo 875/876 Corrosive
Easy-rinsing, water-based system works well on copper, brass steel and some stainless steel. Best suited for oven heat. Residue must be removed after soldering.
|
150°C - 275°C
300°F - 525°F
|
Restrictive, providing reasonable spread of filler metal. Ideal for templating applications.
|
N/A
|
Handy Flo 880 Halide Free
Works well on copper, brass and most plated surfaces. Residue may be left on parts after heating or easily removed with hot water if desired.
|
150°C - 275°C
300°F - 525°F
|
Will slump or fall into the joint area during the initial stages of heating.
|
N/A
|
